Big Jim’s bow quiver is easy-on and easy-off because of the rock solid rubber strap attachment system.
Available in: Small, Medium and Large, 4 or 5 Arrow Gripper.
Available colors are: Chocolate, Tobacco, Black and Buckskin in Plain or Branded with our custom logo.
Colors may vary slightly and It is common for there to be small markings in the leather.
The small will hold 3 large sized broodheads (Foam dimensions are 2 7/8 x 1 5/8)
The medium will hold 4 average sized broadheads easily and a field point (Foam dimensions are 3 x 2 inches)
The large will hold 5 broadheads easily (Dimensions are 3 1/2 x 2)
Please remember these are custom items. We do our best to keep all sizes and colors in stock but please allow an extra 2 days in case we ned to build yours. Thanks! (See pics on left)
We have added photos are of a small quiver mounted on a Big Jim’s Desert Bighorn.
ALSO IN THE PHOTO WE HAVE 5 ACE 2 BLADE BROADHEADS ON 11/32 SHAFTS.
INSTRUCTIONS ON HOW TO ATTACH THE BOW QUIVER
STEP 1: DO NOT, I repeat, DO NOT remove the strap from the slot. As it is pre-inserted prior to shipping. It must be in this position to install the quiver.
STEP 2: With the strap on one side and the brass post on the other, place the quiver against the bow limb at desired spot (as seen in video) Place thumb by the brass post, press against the limb, grab the strap with your other hand, pull the strap over the opposite side of the limb and secure on post using desired hole. (see video)
STEP 3: Secure bottom section of quiver to bottom limb using the same procedure as for the top section. Be sure to place quiver sections as close to riser as possible and not on working part of limbs as this will result in decreased limb efficiency.
SEE INSTALLATION VIDEO HERE: https://www.youtube-nocookie.com/embed/uWBXHMZg_Co?rel=0