Arrow Wraps

12 Arrow Wraps per package

Wraps are 9 inches long and 1  inch wide

(On larger diameter shafts, there may be a slight gap in coverage)

To Apply Your Wraps:

1) Remove old fletching

2)Clean shaft with adhesive removal

3)Wipe off with rubbing alcohol

4)Lay wrap, adhesive side up on a solid surface

5)Line up the end of the arrow, nock removed, with the end of the wrap and slide until the arrow meets the wrap—parallel

6)Press down and roll the arrow slowly and with some pressure into the wrap

7)Fletch

**NOTE–These wraps are not wide enough to completely cover the Byron Ferguson Heavy Hunter Shafts